This data represents typical values for the production material. The data should not be used to write, or in place of, material specifications.
Information provided by Arlon, Silicone Technologies Division| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | g/cc | lb/in³ | Silicone Property; Arlon SQA-TMS-024 |
| 厚度 | microns | mil | Side 1; Arlon SQA-TMS-003 |
| microns | mil | Side 2; Arlon SQA-TMS-003 | |
| microns | mil | Liner 1 | |
| microns | mil | Liner 2 | |
| microns | mil | Substrate; Arlon SQA-TMS-003 | |
| microns | mil | Overall; Arlon SQA-TMS-003 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 肖氏硬度 (邵氏 A) | Silicone Property; ASTM D2240 | ||
| 抗张强度 | MPa | psi | Silicone Property; ASTM D412 |
| 伸长率 (断裂) | Silicone Property; ASTM D412 | ||
| 剥离强度 | kN/m | pli | Bond Strength; ASTM D624 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 最高工作温度, Air | °C | °F | |
| 最低工作温度, Air | °C | °F |
| 加工性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 固化时间 | min @Temperature 204 °C | hour @Temperature 400 °F | Recommended Postcure Cycle |
| min @Pressure 0.0689 - 0.345 MPa, Temperature 149 °C | hour @Pressure 10.0 - 50.0 psi, Temperature 300 °F | Recommended Cure Cycle | |
| 保质期 | Month @Temperature 21.1 - 26.7 °C | Month @Temperature 70.0 - 80.0 °F | From date of manufacture |
| 材料描述 | 测试方法 | |
|---|---|---|
| 颜色 | Red | |
| 产品总重量（oz/yd2） | 15 | Arlon SQA-TMS-025 |
| Uncoated Fabric Break Strength | 200 lb/in | Fill Strength, Substrate Property, Arlon SQA-TMS-026 |
| 250 lb/in | Warp Strength, Substrate Property, Arlon SQA-TMS-026 |